This machine is suitable for crushing various hard and brittle materials, such as iron ore, copper ore, gold and silver ore, molybdenum ore, lead-zinc ore, tungsten ore, manganese ore, glass raw materials, refractories, ceramics, cement, artificial The crushing and crushing of various special hard, medium hard and abrasive materials such as sand, corundum, talc, olivine, feldspar, fluorite, limestone, silicon carbide, steel slag, etc. equipment.

The feeding granularity of the machine is as specified in the performance parameter table. It is forbidden to enter the crusher with materials larger than the specified value, and the maximum feed moisture does not exceed 10%. Generally, the ore that comes out of the sand washer can directly enter the crusher. The crusher discharge size ≤ 10mm, accounting for 20% -60%, the ore is fragile, the smaller the input particle size, the higher the content of qualified products, and vice versa is low, change the rotor speed, but also can adjust the product particle size, therefore, It is ideal to use a graded device as a closed circuit system.

PCL vertical impact crusher can also be used for coarse grinding operations, can crush the 8-36mm feed, for 2-8mm feed can be broken to 18-100 mesh.

PCL vertical impact crusher installed power can be configured according to user requirements.

★Vertical impact crusher technical parameters:

Diameter of impeller ㎜	850	1050	1250
Impeller speed r/min	1200–1620	1000–1630	850–1350
Maximum feed particle size ㎜	50	60	60
Discharge size ㎜	＜5（20%–50%）	＜5（20%–50%）	＜5（20%–50%）
Through ability t/h	80–120	135–210	180–325

Impact Crusher