Workers in ore enterprises sometimes encounter sudden shutdown when using Jaw Crusher. If they can't find the cause of the downtime and repair it in time, they will cause more damage, and the machine will not be able to The use of stoppages caused the company to suffer huge losses.

 

So why did the jaw crusher stop working suddenly? How should the jaw crusher stop suddenly? Let's take a look at it:

 

First, during the use of a jaw crusher, some workers will continue to feed ore raw materials into the material inlet in order to catch up. In this way, if the load capacity of the machine is exceeded, the feed port will be blocked. Workers must clean the feed inlet before they can produce. Therefore, the raw materials must be added evenly during the production process so that the work stoppage due to clogging of the feed inlet will not occur.

 

Second, jaw crusher is powered by the transmission belt, so if the tightness of the belt will cause a shutdown. Too loose can not work because there is no power, too tight will make the belt easy to break, it will also affect the work. So check the lower belt before you start the machine every time.

 

Third, the jaw crusher will bear a great capacity in the process of operation, which will cause the machine does not see loose, thus affecting the work. For example, in a jaw crusher, there is a device called an eccentric shaft. When the tight bush for fixing this device is loose, the eccentric shaft is stuck in the machine and there is no way to work. The correct way is to check the machine. Whether the various parts are loose and fastened in time.